Koch-Chemie × COLOURLOCK COLOURLOCK "Sek-Off" Remover for Superglue Residue 20ml

COLOURLOCK Sek-Off — Specialist Remover for Superglue Residue on Leather & Plastic

How does COLOURLOCK Sek-Off work? — The specialist remover lifts superglue residue off leather, faux leather and many plastic surfaces in a controlled way, without attacking the material too hard, and leaves a clean, repair-ready surface.

COLOURLOCK Sek-Off is the precise fix when superglue has landed on leather or plastic. The remover softens hard, brittle glue residue exactly where scraping it off by hand would do damage. It works in a controlled way, takes the hardness out of the glue, makes it scrapable, and avoids the usual surface damage like shiny spots, abrasion edges or colour pull. Ideal for cars, furniture, bags, shoes and interior parts in leather, faux leather and many plastics.

• Targeted softening of glue residue – Softens superglue without attacking a wide area.
• Gentle on the material when used right – Cuts the risk of roughening, colour loss or shiny patches.
• Proper prep for repair – Leaves a clean, smooth base for binder, dye or care products.

How it works & material compatibility

Sek-Off works with solvent-based components that swell and soften the molecular structure of superglue, so you can lift the glue off carefully. Superglue sets into extremely hard, glassy structures that are almost impossible to remove safely without chemical help. The remover takes the hardness out locally, without affecting a wide area of the surface. Koch-Chemie tunes the action so leather or plastic isn't stressed more than it needs to be — but working with control is still one of the biggest factors in getting a perfect result.

Prep, application & proper removal technique

Before you reach for Sek-Off, the surface should be clean and bone dry. You apply the remover sparingly onto the glue residue — never across the whole panel. After a short dwell time the glue starts to soften and you can lift it off carefully with a blunt tool or a cotton cloth. With thick glue layers, work step by step to protect the surface. Once it's off, clean the leather and, if needed, even it out cosmetically with binder, Leather Fresh or care products. On plastic surfaces, a thin coat of plastic dye or primer gives the perfect finish.

Results, uses & where it differs from alternatives

After the job the surface is free of superglue, smooth and ready for the next steps like colour correction or care. Sek-Off suits smooth leather, faux leather, many plastics, textured interior parts and decorative surfaces. It doesn't replace a full clean or repair — it's a precise specialist tool for problem cases. With delicate or open-pore leather, work especially carefully, because superglue often soaks in deeper – here you may then need binder or Fluid Leather to even out the look.

Common questions about COLOURLOCK Sek-Off

Can Sek-Off remove any kind of superglue?

Yes, most superglues you'll find in the shops. Stains that have soaked in deep need several passes.

Is the product safe for all types of leather?

Fine for pigmented leather. Open-pore leather reacts more sensitively and needs very careful handling.

Does Sek-Off attack the colour?

With careful, spot-on use, usually not. Overdo it and the surface can go slightly matt.

Can I dye straight after removal?

Yes. Once it's cleaned and dry, you can apply Leather Fresh or Fluid Leather with no trouble.

Does Sek-Off also help with glue residue on plastic parts?

Yes. It works really well especially on smooth or lightly textured plastics – follow up with primer if needed.

Last updated: 03.12.2025 — Author: Daniel (Detailing1)