Dr. Wack "S100" "S100" Dry Lube Chain Spray for Motorcycle (Transparent) 2400ml

The ultimate transparent chain care for your motorcycle from Dr. Wack is the "S100" Dry Lube Chain Spray

The S100 Dry Lube Chain Spray from Dr. Wack pulls together the best of grease and dry lubrication in one clever hybrid formula. It gives you top-notch wear and corrosion protection through a dry, flexible film that keeps the whole chain area clean for the long haul. Because it shrugs off water and dirt, the chain keeps its original colour. The spray contains PTFE and works with all O-, X- and Z-rings. The new spray head lays it down exactly where you want it, so you don't burn through product.

• Clever hybrid formula: Combines the upsides of grease and dry lubrication for all-round protection.

• Clean chain area: Stops fling-off and keeps the chain and everything around it clean.

• Water- and dirt-repellent: Shields the chain from the elements and keeps its original colour.

Easy to use, easy on product

Using the S100 Dry Lube Chain Spray couldn't be simpler: shake the can well before use, flip out the spray tube and lay a thin, even coat on the inside of a clean, dry chain. Then let it dry for at least an hour, ideally overnight. The new spray head puts it down precisely and sparingly, so a can goes a long way. Re-treat the chain after long rides in the rain, or at the latest every ~600 km.

Long-lasting protection against wear and corrosion

The S100 Dry Lube Chain Spray gives you top wear and corrosion protection thanks to its dry, flexible film. The clever hybrid formula keeps the chain protected day in, day out, and seriously stretches the life of the whole chain set. On top of that, the chain keeps its colour, so it stays looking sharp. The water- and dirt-repellent finish also helps the chain stay clean even when conditions get rough.

Awards and quality seals

The S100 Dry Lube Chain Spray has picked up several awards, including a "Motorrad Testurteil SEHR GUT" in issue 07/2020 and "Motorrad Best Brand 2023" in the chain sprays/cleaning and care category. Awards like these back up just how good and effective this product is.

How to apply S100 Dry Lube correctly

Shake the can well before use and fold out the spray tube. Clean the chain and let it dry completely—the film will not adhere as well to a wet or dirty chain. Then, spray the Dry Lube thinly and evenly onto the inside of the chain so that the rotation distributes the product outwards.

Allow the transparent protective layer to set for at least one hour afterwards, ideally overnight. This ensures the lubrication remains dry and flexible, does not fling off, and keeps the area around the chain clean. The PTFE formula is suitable for O-, X-, and Z-rings.

Reapply to the chain after long rides in the rain or, at the latest, after approximately 600 km. This maintains protection against wear and corrosion and keeps the chain color unchanged. Limit: A Dry Lube builds up less of a visible grease film than traditional chain grease—those aiming for high mileage under full load should choose shorter intervals.