Q²M Maintenance by GYEON

Car care and cleaning for coated vehicles with GYEON Q²M Maintenance

What is GYEON Q²M Maintenance? The Q²M Maintenance range covers every care, cleaning and pre-wash product from GYEON, built specifically to be safe on coated vehicles – from shampoos and pre-washers through wheel cleaners to quick detailers and spray sealants.

The GYEON Q²M Maintenance range is the logical answer to a question that comes up again and again once you've had a coating applied: how do you look after a coated car properly without wrecking the coating? GYEON built a full product line for exactly this, tuned chemically and functionally to its own Q² coatings. The result: cleaners strong enough to pull off dirt, iron fallout and bug splatter, yet gentle on the coating's SiO₂ network so they don't touch the hydrophobics. If you've put money into a GYEON coating, Q²M Maintenance is the right way to protect that investment for the long haul.

• Coating-safe chemistry with full cleaning power. Every Q²M Maintenance product is built around pH-neutral or gentle formulations that won't attack an existing ceramic coating. And you don't give up cleaning performance for it – dirt, brake dust, iron fallout and bugs still lift off the way they should.
• A complete system from pre-wash to drying. The Q²M Maintenance range covers every step of a proper car wash: pre-wash, shampoo, wheel care, glass cleaning, bug removal, quick detailer and spray sealant. You don't need products from other brands – system compatibility runs right through the line.
• Keep the beading alive and top it up. With quick detailers and WetCoats from the Q²M line you can hold the hydrophobic behaviour of a ceramic coating steady between refreshes. That keeps the coating performing at its best for longer, without having to lay down a fresh sealant.

Detailing1's tip from the shop: The single most important step in the maintenance workflow is the pre-wash. Always reach for a snow foam or pre-wash before the wash mitt ever touches the surface. That loosens the heavy dirt without contact and cuts the risk of wash marring right down – even on coated cars. A coated car isn't bulletproof; it just forgives faster and cleans up nicer.

Q²M pre-wash, shampoo and the wash workflow for coated vehicles

The wash workflow for a coated car with GYEON Q²M Maintenance always starts touch-free: a Q²M Pre-Wash or Snow Foam goes over the whole car and lifts off the heavy dirt, bugs and road grime with no mechanical contact. Only after you rinse that off do you move to the hand wash with a Q²M shampoo and a good wash mitt. The Q²M BodyWash Concentrate is ideal for regular washes on coated surfaces – pH-neutral, with good suds and enough lubricating additives for a safe hand wash. After the wash you rinse the car with clean water and dry it off with a drying towel or compressed air. Reach for a quick detailer at this point and you not only get a streak-free finish, you top up the beading at the same time.

Wheel cleaner, iron remover and specialist cleaners for a deep clean

Wheels, tyres and heavily contaminated areas usually need something stronger than the bodywork shampoo. GYEON's Q²M Wheel Cleaner is a pH-controlled wheel cleaner that lifts brake dust and grime effectively without damaging the coating on the wheel. For stubborn iron contamination on paint and wheels there's Q²M Iron – an acid-based decontaminator that makes iron particles react and bleed a visible purple before you rinse them away. This process – also called “iron decontamination” – is a key step before any deep clean or before you lay down a fresh coating. For bug residue, tar spots and stubborn organic muck there are specialist cleaners in the line, each aimed at a certain type of dirt without being needlessly harsh.

Quick detailer, spray sealant and coating maintenance between washes

Between washes and after drying quick detailers and spray sealants are the most important products in the maintenance workflow. The Q²M Cure is a spray sealant that goes onto the wet bodywork after the wash and tops up the coating's beading. Or you can use the Q²M Detailer on a dry surface – as a finishing product after drying or for a quick top-up between washes. Both are formulated so they don't break down an existing ceramic coating but actively back up its protection. For glass cleaning inside and out there's Q²M Window Cleaner – streak-free, alcohol-free and compatible with glass coatings.

Q²M Maintenance compared: coating-safe care vs. standard car-care products

Standard car-care products aren't automatically safe for coated vehicles. Plenty of common shampoos carry alkaline additives or wax components that either attack the ceramic coating or cloud its clarity. Alkaline cleaners can break down a coating's SiO₂ structure over time – you notice it as the hydrophobics drop off and the water stops sheeting the way it used to. The Q²M Maintenance products are formulated specifically to avoid that. Compared with other coating-safe care lines like Koch Chemie or non-Gyeon maintenance products, the Q²M line has one advantage: compatibility with the Q² coatings is tested and confirmed by the maker itself.

Buy GYEON Q²M Maintenance: the complete care system for your coated vehicle

At Detailing1 you'll find the full GYEON Q²M Maintenance range – from pre-washers and shampoos through wheel cleaners and iron removers to quick detailers and spray sealants. Every product pairs up with the matching GYEON kit from the Q²M Accessories line. If you've just had a fresh coating done and you're not sure where to start with the care: pre-wash + shampoo + quick detailer after drying is the ideal entry workflow. You'll find everything for it right here.