GYEON Q²M Cut Polishing Pad (Rotary / Eccentric) 2 Stück

Defect correction with precision – GYEON Q²M Cut Polishing Pad

What is the GYEON Q²M Cut Polishing Pad? The GYEON Q²M Cut Polishing Pad is a medium-firm pad for rotary and dual-action machines – built for the correction stage with medium-cut compounds, with even compound pick-up and controlled heat build-up so you can work precisely.

The pad matters as much to the end result as the compound itself. The GYEON Q²M Cut Polishing Pad is built for the correction stage of paint work – to run with Q²M Compound (medium cut) on both dual-action and rotary machines. The medium-firm foam cell strikes the right balance between compound pick-up, heat build-up and cut, so your defect correction stays controlled and repeatable.

• Medium-firm foam cell that takes compound on and gives it back evenly. The foam structure of the Q²M Cut pad is dialled in for medium-cut compounds like Q²M Compound – the pad soaks the compound up evenly and releases it onto the paint in a controlled way, so the finish comes out uniform.
• Controlled heat build-up keeps the paint out of trouble. Too much heat while polishing can damage paint – especially soft paint or wrapped panels. The Q²M Cut pad is built so the heat stays in the safe zone, even when you push the machine settings.
• Just as happy on a dual-action as on a rotary. The Q²M Cut Polishing Pad runs on both machine types – on the dual-action for safer, more forgiving passes, on the rotary when you want more cut. The pad holds its shape, so results stay consistent whichever machine you grab.

Day-to-day from Detailing1: Prime the Q²M Cut pad before its first job with a small amount of compound (spread 3–4 drops across the pad and run it in on a piece of cardboard with no pressure). That loads the pad evenly and saves you a patchy first pass. Clean the pad regularly with a pad brush – a clogged pad loses a serious chunk of its cut.

Picking a pad in the GYEON polishing system: which pad for which job?

GYEON built its pads as one matched system. The Heavy Cut pad for heavy defects with Compound+, the Q²M Cut pad for medium defects with Q²M Compound, the Polish pad for fine correction and the Finish pad for the last pass and coating prep. On top of that come the lambswool pads for the rotary (Heavy Cut and Cut) when you want maximum cut.

Pad care and how long a pad lasts

Polishing pads are wear parts, but treat them right and they last a lot longer. After every polishing session, clean the pad with a pad brush or a pad washer – compound left sitting in the foam kills your cut and can put scratches back in. The Q²M Cut pad cleans up gently with water and mild soap, and once it is dry it goes straight back to work. A clean pad always beats an old, saturated one.

What to pair it with: Q²M Cut pad and compound

The go-to combo for medium defect correction: Q²M Cut pad + Q²M Compound on the dual-action (speed 5–7) or the rotary (1200–1500 rpm). That pairing pulls out everyday swirls, wash marks and light holograms in a single pass. For the finishing step after it: Q²M Finish pad + Q²M Polish for the final depth of gloss. The matched system gets you professional results you can repeat.

The Q²M Cut pad on different types of car

The Q²M Cut pad works on every automotive paint – from soft import clearcoats to hard German premium paint. On soft paint: lower speed and less pressure. On hard paint: crank the speed up and you can lean on the pad more. With very soft paint or on a hot day, keep checking that the panel is not overheating. The pad itself is tough and lasts.

Who it is for: the Q²M Cut pad for correction work

The GYEON Q²M Cut Polishing Pad is the one you reach for at the correction step of any proper paint job. If you are starting out, run it on the dual-action – safe, forgiving and still effective. As a complete polishing kit: Heavy Cut pad + Q²M Cut pad + Polish pad + Finish pad – together with Q²M Compound+, Q²M Compound and Q²M Polish.