{"product_id":"koch-chemie-the-finisher-automotive-powerspeedpolish-onesteppolitur","title":"THE FINISHER \"PowerSpeedPolish\" One-Step Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie „PowerSpeedPolish“ — One-Step Polish for noticeable Correction \u0026amp; High Gloss\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhen do I use PowerSpeedPolish? — If you want to visibly reduce wash scratches, hazing, and minor defects in a quick pass, while achieving a high-gloss, hologram-free finish. Ideal one-step for daily drivers after proper pre-wash and drying.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER PowerSpeedPolish OneStep Polish\u003c\/strong\u003e combines modern cut with a safe finish in one step. Micro-abrasives gently correct defects, fine-oily carriers smooth the paint surface and are easy to wipe off – without excessive dust or sticky residues. Perfect for vehicles with typical wash marks when time is of the essence but the result needs to look \"detailed.\" In the workflow, PowerSpeedPolish sits between the pure finish wax polish (ShineSpeedPolish). Afterwards, depending on the desired outcome, you can top it with JustPerfect (hydrophobicity) or leave the pure, sharply defined finish as is.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerful One-Step:\u003c\/strong\u003e noticeable defect reduction + high-gloss, calm paint finish in one pass – ideal for daily drivers and sales detailing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe \u0026amp; efficient:\u003c\/strong\u003e long open time, low-dust application, clean wipe-off; minimizes hologram risk on common clear coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-strong:\u003c\/strong\u003e compatible after TropicSnow \u0026amp; MagicShampoo; can be \"popped\" with JustPerfect as desired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eOne-Step Polish – Cut, Gloss \u0026amp; Finish in Balance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOne-Step Polish\u003c\/strong\u003e means that abrasive performance and finishing behavior are balanced so that you achieve a visible update after a single polishing pass. THE FINISHER PowerSpeedPolish OneStep Polish uses finely tuned micro-abrasives that initially cut and then finish very smoothly. This visibly removes car wash haze, light swirls, and gray hazing without the finish appearing \"milky.\" The low-oil matrix can be completely polished out, creating a clear, crisp reflection – the ideal base for applying protection afterward or showcasing the pure finish. On soft paints, the polish behaves gently; on medium-hard paints, it delivers the best ratio of defect removal and brilliance.\u003c\/p\u003e\n\u003ch3\u003eDual-Action Polishing – Pad Selection, Pressure \u0026amp; Crosshatch for Reproducible Results\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDual-action polishing\u003c\/strong\u003e highlights the strengths of THE FINISHER PowerSpeedPolish OneStep Polish: Work in the shade, on a cool surface, with clean pads. Start with a medium-hard foam pad; for increased defects, you can move to a firmer pad; for sensitive paints, revert to a soft finishing pad. Apply 3-4 pea-sized drops, spread at a low speed, then polish in a consistent crosshatch pattern with moderate pressure until the film becomes clear and thin. Finally, slightly reduce pressure and oscillation speed to \"pull\" the last trace to a high gloss. Handle edges, corners, and fresh paint cautiously; masking sensitive plastics saves rework. Completely remove residues with a fresh, dense microfiber towel – and the clean one-step finish is complete.\u003c\/p\u003e\n\u003ch3\u003eHolograms, Paint Hardness \u0026amp; Limits – When to Reapply, When to Split\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHolograms\u003c\/strong\u003e are rare with correct pad selection and dual-action polisher, but can occur on extremely soft or sticky clear coats. In such cases, a short \"jeweling\" pass with a soft pad and minimal product helps. Very hard paints or deeper defects sometimes require more aggression: Here, an initial, quick correction pass with RoughCut is worthwhile, followed by a quick refining pass with PowerSpeedPolish. For pure gloss enhancement without significant cut, ShineSpeedPolish is sufficient. Please avoid matte paint\/PPF – polishing would make the matte finish glossy. After the one-step, the goal determines the next step: maximum everyday protection with sealant directly after polishing, a show finish, or quick care refreshment between washes with JustPerfect after the next wash.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFrequently Asked Questions about THE FINISHER × Koch-Chemie „PowerSpeedPolish“ — OneStep Polish\u003c\/h2\u003e\n\u003ch4\u003eDoes PowerSpeedPolish replace a multi-stage correction?\u003c\/h4\u003e\n\u003cp\u003eFor many daily drivers, yes. However, deep scratches, severe holograms, or oxidation require preliminary work with RoughCut\/FineCut. PowerSpeedPolish is the strong middle ground between correction and finish.\u003c\/p\u003e\n\u003ch4\u003eWhich machine should I use?\u003c\/h4\u003e\n\u003cp\u003eA dual-action polisher provides the best, hologram-free finish. With rotary machines, only experienced users should work and always \"relieve\" with a finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes the polish dust?\u003c\/h4\u003e\n\u003cp\u003eWith fresh pads, moderate product quantity, and realistic passes, it's low-dust. Too much product, overloaded pads, or heat promote dust – regularly blow out\/change pads.\u003c\/p\u003e\n\u003ch4\u003eDoes it leave protection behind?\u003c\/h4\u003e\n\u003cp\u003ePrimarily, it is a correction\/finish polish. For durable everyday protection, we recommend BodyGuard immediately afterward. For quick gloss between washes: JustPerfect.\u003c\/p\u003e\n\u003ch4\u003eOn which surfaces should it not be used?\u003c\/h4\u003e\n\u003cp\u003eMatte paints\/wraps, textured plastics, PPF with a matte finish. Treat edges, fresh paint, and sensitive areas cautiously; avoid glass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 31.10.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56300095865167,"sku":"D1-KCX-77715-250ML-01","price":17.99,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-the-finisher-powerspeedpolish-onesteppolitur_250ml_77715-250ML-01.png?v=1761911764","url":"https:\/\/detailing1.ch\/en\/products\/koch-chemie-the-finisher-automotive-powerspeedpolish-onesteppolitur","provider":"Detailing1","version":"1.0","type":"link"}