{"title":"Finish-Politur Schritt 2 von THE FINISHER","description":null,"products":[{"product_id":"koch-chemie-the-finisher-marine-finecut-schritt-2-politur","title":"THE FINISHER \"FineCut\" Step 2 Polish","description":"\u003ch2\u003eTHE FINISHER × Koch-Chemie \"FineCut\" — the step-2 polish for a clear, hologram-free finish\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat do I use FineCut for? — As a step-2 polish after the heavy cut, FineCut pulls out haze and holograms, visibly clears up the paint and sets up a high-gloss, clean finish ready for sealing – fast, low-dust and repeatable.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTHE FINISHER FineCut step 2 polish\u003c\/strong\u003e is your precision refining step after defect correction. It lifts cut marks, grey haze and light swirls out of the clear coat, breaks down smoothly and leaves a calm, high-gloss look – the perfect bridge between the heavy correction stage (\u003cem\u003eRoughCut\u003c\/em\u003e) and the protection layer (\u003cem\u003eBodyGuard\u003c\/em\u003e or wax-based finishes). Day-to-day that means less rework, clean wipe-off and reliable results on common OEM clear coats – spot on for daily drivers, sales prep and \"clearing up\" after spot corrections.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTargeted refining:\u003c\/strong\u003e pulls out holograms and cut haze, sharpens the reflections and gives you a calm, deep paint look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to work:\u003c\/strong\u003e long open time, low-dust matrix and easy buff-off – spot on for a dual-action workflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem logic:\u003c\/strong\u003e perfect after \u003cem\u003eRoughCut\u003c\/em\u003e, then protect (e.g. \u003cem\u003eBodyGuard\u003c\/em\u003e); for quick all-in-one jobs, \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e is ready to go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStep-2 polish – micro-abrasives, oil matrix \u0026amp; finish stability\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStep-2 polish\u003c\/strong\u003e means controlled cut with a fine break-down. FineCut’s micro-abrasives grab the leftover defects from the cut, break down evenly and finish very fine. The moderately oily carrier matrix keeps the pad \"open\" for longer, cuts down on dry running and helps a streak-free wipe-off. The result is a clear, crisp gloss with no \"milky\" zones and clearly reduced holograms – the ideal base for any sealant. Because FineCut doesn’t leave heavy fillers sitting on top, the look stays put and doesn’t fall apart after the first wash.\u003c\/p\u003e\n\u003ch3\u003eAutomotive workflow – pad choice, pressure, cross-passes \u0026amp; buffing off\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAutomotive workflow\u003c\/strong\u003e: after the pre-wash (TropicSnow), hand wash (MagicShampoo) and, if needed, a heavy step with RoughCut, you work panel by panel. Start with a medium-hard foam pad; switch to a soft finishing pad on sensitive, soft clear coats, and on hard-wearing paint a medium-firm foam can add bite. Prime the pad thin, 3–4 drops of product, spread on a low speed, then polish in even cross-passes with moderate pressure until the film goes visibly and noticeably \"thin\". At the end, ease off the pressure and stroke speed (\"jeweling\") to pull that last bit of gloss. Work edges and fresh paint gently, and keep off plastics or tape them off. Take residue off fully with a fresh, dense microfibre – the finish should look dry, clear and cloud-free. Then seal to suit the job: fast and hydrophobic with BodyGuard, classic deep gloss with ShineSpeedPolish as a wax-based finish, or a quick \"pop\" in between with JustPerfect.\u003c\/p\u003e\n\u003ch3\u003eCompatibility \u0026amp; limits – paint hardness, one-step alternative \u0026amp; protection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility \u0026amp; limits\u003c\/strong\u003e: FineCut works brilliantly on most OEM clear coats – on very hard paint it may want a longer set or a slightly more aggressive pad, and on very soft paint a gentle, short follow-up with a soft pad helps. When time is tight and you need defect removal \u003cem\u003eand\u003c\/em\u003e finish in one go, reach for \u003cem\u003ePowerSpeedPolish\u003c\/em\u003e as a one-step. If there are only fine wash marks and you want protection, \u003cem\u003eShineSpeedPolish\u003c\/em\u003e (a wax polish) is often enough. Don’t polish matte paint\/wraps or PPF – you’d change the matte level or gloss look without meaning to. After FineCut, a protection layer always goes on the clean finish: \u003cem\u003eBodyGuard\u003c\/em\u003e for hard-wearing water beading or, if you like, a waxy finish. Clean cloths, cool panels and shade are a must; if a pad dusts, it’s overloaded – blow it out or swap it.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eCommon questions about THE FINISHER × Koch-Chemie \"FineCut\" — step 2 polish\u003c\/h2\u003e\n\u003ch4\u003eHow is FineCut different from RoughCut?\u003c\/h4\u003e\n\u003cp\u003eRoughCut is the heavy defect removal (step 1), FineCut refines afterwards: it takes out haze\/holograms and brings clarity to the look. The two build on each other.\u003c\/p\u003e\n\u003ch4\u003eDual-action or rotary?\u003c\/h4\u003e\n\u003cp\u003eA dual-action gives you the safest, hologram-free result. Only work with a rotary if you’re experienced, and settle the panel with a quick dual-action finishing pass.\u003c\/p\u003e\n\u003ch4\u003eDoes FineCut dust?\u003c\/h4\u003e\n\u003cp\u003eWith the right amount of product, cool panels and clean pads it stays low-dust. Dust usually comes from overloaded pads or too much heat – blow out\/swap pads regularly.\u003c\/p\u003e\n\u003ch4\u003eCan I seal straight after?\u003c\/h4\u003e\n\u003cp\u003eYes. Take residue off fully, then seal with BodyGuard or – if you like – set a waxy tone with ShineSpeedPolish\/WaxPolish.\u003c\/p\u003e\n\u003ch4\u003eIs it OK for gelcoat too?\u003c\/h4\u003e\n\u003cp\u003eSpot work yes, e.g. after heavier steps, but large gelcoat areas are quicker with PerfectOne (one-step), and then you lock them in with WaxPolish\/BodyGuard.\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003csmall\u003eLast updated: 01.11.2025 — Author: Daniel (Detailing1)\u003c\/small\u003e\u003c\/p\u003e","brand":"Koch-Chemie × THE FINISHER","offers":[{"title":"250ml","offer_id":56301049971023,"sku":"D1-KCX-77102-250ML-01","price":15.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/77102-250ML-01_1.png?v=1778249523"}],"url":"https:\/\/detailing1.ch\/en\/collections\/the-finisher-boot-finish-politur.oembed","provider":"Detailing1","version":"1.0","type":"link"}