{"title":"Lackkontrollleuchten","description":"\u003ch2 id=\"speakable-headline\"\u003eLackkontrollleuchten\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eLackkontrollleuchten\u003c\/strong\u003e: Kontrollleuchten machen feine Spuren im Lackbild sichtbar. Lichtcharakter, Helligkeit und Position beeinflussen, welche Defekte sichtbar werden.\u003c\/p\u003e\n\u003cp\u003eDie Leuchte wird nach Arbeitsabstand und Aufgabe gewählt; gleichmäßige Raumausleuchtung ersetzt nicht jede gezielte Lackkontrolle.\u003c\/p\u003e","products":[{"product_id":"flex-sf150p-swirl-finder","title":"\"SF 150-P\" Swirl Finder","description":"\u003ch2\u003eFLEX SF 150-P Swirl Finder — pro inspection light for swirls, holograms and paint defects\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX SF 150-P Swirl Finder? The FLEX SF 150-P is a professional inspection light built specifically for paint checking — a spot light with a focused beam that reveals swirl marks, holograms, scratches and fine paint defects before and after polishing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eThe best polish in the world does you no good if you can't see it. The \u003cstrong\u003eFLEX SF 150-P Swirl Finder\u003c\/strong\u003e is the tool that separates a decent polish from a professional one: an inspection light that reveals swirl marks, holograms and fine scratches on the paint that would stay invisible under normal light. Polish without a swirl finder and you're polishing blind.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX SF 150-P\u003c\/strong\u003e isn't just another torch — it's a dedicated inspection tool for paint work that reveals the surface structure of the clear coat with a tight, focused beam hitting at a specific angle. Swirls and holograms are fine scratches in the clear coat that show up as bright patterns under raking light. The SF 150-P lays down exactly that raking light — on a defined spot, sharp enough for close-up inspection.\u003c\/p\u003e\n\u003cp\u003eAs an inspection tool, the SF 150-P rounds out the full FLEX polishing system: you use it before polishing to assess the damage, during the process to track progress, and after every step to verify the result. A polishing routine without an inspection tool is guesswork — with the SF 150-P it becomes measurable quality control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFocused spot beam for pinpoint swirl and hologram visibility — the professional detailer's eye.\u003c\/strong\u003e The SF 150-P throws a concentrated spot with a defined angle of incidence that lights up fine scratches and swirl marks in the clear coat as bright patterns. That spot beam is the technical backbone of professional paint inspection: a diffuse light wouldn't pick out the fine structures — the tight spot makes them unmistakable, even to an untrained eye.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional inspection tool for before and after polishing — quality control at a professional level.\u003c\/strong\u003e The SF 150-P makes polishing progress measurable: before the first cut step it shows the type and depth of the defects. After each polishing step it tells you whether that step fully removed the defects or whether more work is needed. That feedback loop is the heart of professional polishing — without it you're working in the dark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact, handy design for day-to-day detailing — always within reach for quick spot checks.\u003c\/strong\u003e The compact size of the SF 150-P makes it the ideal companion in everyday polishing: within reach on the bench or in your tool apron, quick to hand for a spot check, easy to set down when you don't need it. No bulky stand, no fiddly setup — grab it, use it, done.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Getting the most out of the FLEX SF 150-P Swirl Finder: darken the inspection area or work in shaded spots — daylight coming in from the side competes with the spot beam and washes out the swirls. Hold the spot at a shallow 30–45° angle to the paint and move it slowly across the area you're checking — swirls and holograms show up as bright circular or star-shaped patterns. After the finish step, check the surface with the SF 150-P from several angles: a good result is flawless from every angle, with no hologram hiding at one particular light angle.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy inspection is the whole game — making swirl marks and holograms visible\u003c\/h3\u003e\n\u003cp\u003eSwirl marks are fine, circular scratches in the clear coat, caused by the wrong wash methods, poor polishing technique or bad polish. They show up clearly under direct sunlight or under a focused beam like the one from the \u003cstrong\u003eFLEX SF 150-P Swirl Finder\u003c\/strong\u003e — but under normal indirect light they're barely there. That's why customers are happy with a polish under normal lighting, then see the swirls again on the next sunny day.\u003c\/p\u003e\n\u003cp\u003eHolograms are a different kind of defect: they come from wrong polishing technique, too high an rpm, or the wrong pad-and-polish combo on a machine. Unlike swirls, holograms aren't circular — they show an even, streaky pattern that follows the path the pad took. Holograms stand out clearly under the SF 150-P's spot beam and have to be gone completely before the finish step — otherwise the end result won't look professional, no matter how much work went into the polish.\u003c\/p\u003e\n\u003cp\u003eFor experienced detailers, inspecting with the SF 150-P isn't the end of quality control — it's the start: what you find dictates the polishing plan. Deep swirls call for the cut step with PP-C; fine holograms from an earlier pass come out with PP-M or PP-F; a smeary film on the surface isn't a scratch at all but a cleaning issue that needs a different fix. Inspecting with the SF 150-P makes that difference visible — and heads off the most expensive mistake in detailing: the wrong plan for the wrong type of defect.\u003c\/p\u003e\n\u003cp\u003eFor anyone starting out in detailing, the SF 150-P is a teaching tool: it shows you what good technique achieves and what bad technique leaves behind. Check regularly with the SF 150-P and judge the result after each step, and you'll learn more about polishing quality in a handful of sessions than you would by trial and error with no way to see the feedback.\u003c\/p\u003e\n\u003ch3\u003eThe SF 150-P in a professional polishing workflow — inspection as a fixed stage\u003c\/h3\u003e\n\u003cp\u003eA professional polishing routine with the \u003cstrong\u003eFLEX SF 150-P Swirl Finder\u003c\/strong\u003e built in looks like this: car comes in, rough clean, then a first inspection with the SF 150-P — a systematic survey of every paint defect, notes on the trouble spots, and the polishing plan locked in. That first inspection is the basis for the quote you give the customer and for planning the job in-house: how many steps are needed? Which areas need more work?\u003c\/p\u003e\n\u003cp\u003eDuring polishing, the SF 150-P comes out after every step: after the cut step with \u003ca href=\"\/en\/products\/flex-pp-c-cut-polierpad\"\u003ePP-C\u003c\/a\u003e you check whether every deep scratch is gone before you move to the compound step. After the compound step with \u003ca href=\"\/en\/products\/flex-pp-m-universal-polierpad\"\u003ePP-M\u003c\/a\u003e you check whether every hologram from the cut step is gone. Only once the SF 150-P confirms there are no holograms left do you start the finish step with the \u003ca href=\"\/en\/products\/flex-pp-f-finish-polierpad\"\u003ePP-F\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe final quality check before handing the car back to the customer is the last job for the SF 150-P: a systematic inspection of every panel under the spot beam — no hologram, no swirl, no spot missed. Only when that final inspection comes back clean is the car ready to hand over. In this workflow the SF 150-P isn't optional — it's the last quality gate before delivery.\u003c\/p\u003e\n\u003ch3\u003eSF 150-P technical spec — light temperature, focus and run time\u003c\/h3\u003e\n\u003cp\u003eHow well an inspection light performs comes down to more than brightness — the technical detail of the beam decides how reliably swirls show up. The \u003cstrong\u003eFLEX SF 150-P\u003c\/strong\u003e runs a high colour temperature in the daylight-white range, close to natural sunlight. That matters: under warm-white light a lot of swirls are barely visible, because the reddish colour temperature masks the scattered-light reflections off the scratches. Daylight-white with a high CRI makes those reflections sharp and high-contrast.\u003c\/p\u003e\n\u003cp\u003eThe SF 150-P's focused spot creates a defined edge between the lit and unlit area. That sharp edge matters for swirl inspection: holograms and swirls are at their most visible right on the line between the bright spot and the dark surround. Run that edge zone systematically across the panel and you'll find every defect — even the ones that would be less obvious in the middle of the spot.\u003c\/p\u003e\n\u003cp\u003eFor long stretches of use in the shop, run time is a real factor. The SF 150-P is built for professional day-to-day use — solid build, enough output for a full walk-around of a car without fading. The handy size keeps fatigue down even through longer inspection sessions.\u003c\/p\u003e\n\n\u003ch3\u003eSF 150-P head to head — dedicated inspection light vs. torch and daylight\u003c\/h3\u003e\n\u003cp\u003eThe SF 150-P isn't the only light you can spot swirls under — but it's the most effective one for day-to-day work. Line it up against the usual alternatives and you see why a dedicated inspection light is irreplaceable.\u003c\/p\u003e\n\u003cp\u003eDaylight shows swirls well — but only under direct sun at the right angle. Direct sunlight is rarely on hand indoors, and outdoors it depends on the weather, the time of day and which way the car is facing. Base your verdict on polishing quality purely on the sun and you can't check systematically or repeatably.\u003c\/p\u003e\n\u003cp\u003eOrdinary torches don't throw a tight enough raking light for swirl inspection. Too diffuse a source, the wrong part of the spectrum, no defined angle — the result is an unreliable picture that shows swirls sometimes and misses them other times, depending on how you happen to hold it. The SF 150-P takes that luck out of it: same type of light every time, same angle every time, repeatable results every time.\u003c\/p\u003e\n\u003cp\u003eFull-spectrum work lights like the \u003ca href=\"\/en\/products\/flex-dwl-2500-vollspektrum-leuchte\"\u003eFLEX DWL 2500 full-spectrum light\u003c\/a\u003e are superb ambient lighting for the whole space, but they're no substitute for a handheld inspection light. Full-spectrum overhead light shows swirls across the whole panel — the SF 150-P shows them in detail at the exact spot you're checking right now. The two tools complement each other: full-spectrum light for the overall picture, the SF 150-P for targeted close-up checks. Have both and you've got full quality control.\u003c\/p\u003e\n\u003ch3\u003eBuying the FLEX SF 150-P — the investment that makes every polish better\u003c\/h3\u003e\n\u003cp\u003eAt 47.48 EUR the Swirl Finder is one of the cheapest buys in a professional detailing kit — and at the same time one of the most effective. No pricey pad, no elaborate machine upgrade improves polishing quality as directly as the tool that lets you see the quality in the first place.\u003c\/p\u003e\n\u003cp\u003eFor professional detailers the SF 150-P isn't an optional extra — it's must-have kit. Offer polishing services with no inspection light and you're inviting complaints from customers who spot the holograms in the sun — even though your own inspection came back clean. The SF 150-P is your insurance against that: holograms get caught in the shop, not by the customer in the car park.\u003c\/p\u003e\n\u003cp\u003eAs part of a complete FLEX polishing set, we recommend the SF 150-P alongside the \u003ca href=\"\/en\/products\/flex-pp-c-cut-polierpad\"\u003ePP-C\u003c\/a\u003e, \u003ca href=\"\/en\/products\/flex-pp-m-universal-polierpad\"\u003ePP-M\u003c\/a\u003e and \u003ca href=\"\/en\/products\/flex-pp-f-finish-polierpad\"\u003ePP-F\u003c\/a\u003e pads as an essential part of the quality-assurance workflow. Combine those four tools and you've got a complete system for professional paint correction with quality control built in — from the first scratch to a spotless, verified final inspection.\u003c\/p\u003e\n","brand":"FLEX","offers":[{"title":"SF 150-P \"463302\"","offer_id":57377617740111,"sku":"D1-FLEX-463302","price":39.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-sf-150-p-swirl-finder-sf-150-p-463302-463302.png?v=1775059236"},{"product_id":"flex-dwl25001218-led-vollspektrum-leuchte","title":"DWL 2500 12\/18 LED Full Spectrum Light (12\/18V)","description":"\u003ch2\u003eFLEX DWL 2500 12\/18 Full-Spectrum Light — 3000 Lumens, CRI RA 96 and All-Daylight for Professional Paint Inspection\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eWhat is the FLEX DWL 2500 12\/18 Full-Spectrum Light? The FLEX DWL 2500 is a battery-powered LED full-spectrum light with 3,000 lumens, CRI RA 96, and stepless color temperature adjustment from 2,500K to 6,500K — designed for professional paint inspection, hologram detection, and color matching in detailing.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eTo detect scratches, holograms, and paint defects, you need the right light. Not just bright enough, but also color-accurate enough — because many defects are simply invisible under incorrect light. The \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e has been developed precisely for this requirement: a professional inspection light that, with CRI RA 96 and up to 3,000 lumens of work light, makes even the finest surface flaws, polishing marks, and color deviations visible.\u003c\/p\u003e\n\u003cp\u003eThe light is part of the \u003ca href=\"\/en\/products\/flex-ap18-akku-pack-18v\"\u003eFLEX 18V battery system\u003c\/a\u003e and can be operated with 12V and 18V battery packs — a single device that can be flexibly used in the detailing station, for mobile applications, and on the vehicle. Thanks to its IP67 protection class, it is also suitable for use during car washes, polishing work with a water spray bottle, or in humid environments. The integrated USB power bank function also charges smartphones and tablets — practical for long detailing sessions where the phone cannot run out of battery.\u003c\/p\u003e\n\u003cp\u003eWith up to 30 hours of runtime at 300 lumens (economy mode) or full power for intensive inspection phases: it covers both operating modes, making it the most versatile light in the FLEX detailing portfolio. The flexible light intensity control makes it equally suitable as a continuous work light for the entire workday or as a focused inspection light for quality control in the final step.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRI RA 96 — Photo studio level color rendering for maximum defect detection.\u003c\/strong\u003e A Color Rendering Index of RA 96 means that the light renders colors 96% as accurately as natural sunlight. This is crucial for paint inspection: color deviations between body parts, subtle holograms after polishing, and oxidation-related dullness are only reliably detectable under high-quality full-spectrum lighting. Cheap workshop lights with CRI below 80 distort colors and make defects invisible that clearly stand out under the DWL 2500.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Daylight 2,500K–6,500K in 5 stages — Color temperature for every application.\u003c\/strong\u003e The gradual color temperature adjustment allows the light to be precisely matched to the task: Warm white light (2,500K) for evaluating warm-tone paints and metallic colors, neutral white light (4,000K) for general inspection, cool white daylight (6,500K) for detecting holograms and fine polishing marks. What is invisible at 4,000K often clearly catches the eye at 6,500K — and vice versa. This flexibility saves time and increases detection reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 waterproof, USB power bank, and 30h runtime — robust everyday usability.\u003c\/strong\u003e The IP67 protection class makes the DWL 2500 splash-proof and dust-tight — it withstands polishing dust, water sprays, and normal handling in daily detailing. The integrated USB-A interface for the power bank function allows external devices to be charged directly via the light's battery. Up to 30 hours of runtime in economy mode means: For mobile use without access to power outlets, the DWL 2500 is ready for several working days without recharging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\n\u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e For hologram detection after polishing, we recommend setting the DWL 2500 to 6,500K (daylight) and guiding the light flat at a 30–45° angle over the polished surface. Glancing light makes polishing marks and uneven application visible that remain invisible under direct light. Only when the surface is flawless under this test do you move on to the next step. For final color evaluation, 4,000K is recommended for a neutral reference.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eCRI RA 96 and Full Spectrum — why color rendering is crucial for paint inspection\u003c\/h3\u003e\n\u003cp\u003eThe Color Rendering Index (CRI) is the decisive parameter for professional inspection lights. It describes how accurately a light source reproduces colors compared to natural sunlight (CRI 100). The \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e achieves RA 96 — a value that is practically indistinguishable from daylight and is considered a mark of professionalism in the color control industry.\u003c\/p\u003e\n\u003cp\u003eWhat RA 96 means in practice: color deviations between replaced and original body parts after a repair paint job are reliably recognizable under this light. Holograms — the circular pattern that appears when the polishing process has not been completed cleanly — clearly stand out under full-spectrum light, even if they remain invisible under conventional neon light. The finest application marks from finishing pads, oxidation-related dullness at certain angles, differences in clear coat thickness — all of this is recognizable under RA 96 CRI light, making it impossible to overlook poor workmanship.\u003c\/p\u003e\n\u003cp\u003eFor customers who have high-end vehicles detailed, this control reliability is a quality argument: anyone who has worked and inspected with the DWL 2500 can confidently say that the result meets professional standards. And any detailer who delivers without this control step risks receiving complaints that would have been recognizable in the workshop with the right light.\u003c\/p\u003e\n\u003cp\u003eIn practice, the following inspection routine is recommended: first check the polished surface at 6,500K with glancing light (30° angle) for holograms and polishing marks, then at 4,000K for paint uniformity and potential transition zones. Only when both inspections have passed is the result truly ready for acceptance. With the DWL 2500, this routine can be performed quickly and without changing location — simply change the color temperature level, adjust the angle, and you're done.\u003c\/p\u003e\n\u003ch3\u003eAll-Daylight: 2,500K to 6,500K Color Temperature in 5 Stages\u003c\/h3\u003e\n\u003cp\u003eThe All-Daylight function of the DWL 2500 allows the selection of five color temperature levels between 2,500K and 6,500K. This is far more than a technical gimmick — each level has a specific function in the detailing workflow.\u003c\/p\u003e\n\u003cp\u003eWarm white light around 2,500–3,000K is particularly suitable for evaluating warm color tones: bronze, copper, warm silver, certain burgundy and red paints. These tones change their character significantly under cool light and are most accurately judged under warm white illumination. Detailers who work on vehicles with exclusive special colors benefit from this flexibility and can ensure that the color evaluation takes place under nearly natural conditions — not distorted by the cool blue light of a standard workshop lamp.\u003c\/p\u003e\n\u003cp\u003eNeutral white light around 4,000K is the most versatile setting for general work: uniform illumination without color shift, good for the polishing process itself, for pad changes, and for intermediate checks after individual steps. It is also the recommended setting for client consultations at the vehicle — the light is pleasant for the eye and gives the paint and bodywork a realistic, natural appearance.\u003c\/p\u003e\n\u003cp\u003eCool white daylight around 6,000–6,500K is the sharpest instrument for final quality control. Polishing marks, holograms, swirl marks, and paint defects are most clearly visible under this light — the glancing light combined with high color temperature is the best way to declare a paint surface definitively \"finished.\" Anyone who integrates this control step into the acceptance process works with a safety net that cheap tools simply cannot offer.\u003c\/p\u003e\n\u003cp\u003eThe staged switching is deliberately limited to five values — not stepless, but in defined steps. This has a practical advantage: the user can reproducibly access a preferred setting without having to scroll through a spectrum. In everyday use, this means: once learned which level applies to which task — and the DWL 2500 always provides the same reference basis for evaluation.\u003c\/p\u003e\n\u003ch3\u003e3,000 Lumens, IP67, and USB Power Bank — the comprehensive technical features of the DWL 2500\u003c\/h3\u003e\n\u003cp\u003eThe technical equipment of the DWL 2500 is comprehensive and designed for professional continuous operation. The 3,000 lumens in 18V operation are comparable to a very bright office grid lighting panel — enough to create additional contrasts even in brightly lit workshops and make defects visible that disappear in ambient light.\u003c\/p\u003e\n\u003cp\u003eThe IP67 protection class — dust-tight and temporarily submersible up to 1m — makes the light resistant to all normal influences in the detailing workshop: polishing dust, water from spray bottles, sweat, occasional drops onto damp ground. This is not a given for high-performance LED lights in this price range and a clear signal for professional use.\u003c\/p\u003e\n\u003cp\u003eThe integrated USB-A interface for the power bank function is a useful secondary feature: smartphone battery empty during a long outdoor assignment? Simply connect it to the light and continue charging. For mobile detailers who work for several hours without access to power outlets, this is a practical safeguard for communication with customers and for customer service during detailing.\u003c\/p\u003e\n\u003cp\u003eThe light intensity control allows stepless adjustment from 300 to 3,000 lumens. When set to 1,000–1,500 lumens for continuous use as work lighting, a 5.0 Ah battery charge lasts for several hours. For short inspection phases at full power (3,000 lumens), the device consumes more but provides maximum illumination in the shortest possible time. The combination of long runtime and high peak performance makes the DWL 2500 a reliable partner for any duration of use.\u003c\/p\u003e\n\u003ch3\u003eDWL 2500 Comparison — Full-Spectrum Light vs. Conventional Workshop and Photo Area Lights\u003c\/h3\u003e\n\u003cp\u003eStandard workshop lights with CRI 70–80 are sufficient for general work. For professional paint inspection, color matching, and hologram detection, they are unsuitable. The difference is significant: under CRI-80 light, a painted vehicle often looks perfect, even though fine swirl marks are present. Under the \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e with RA 96, the same defects clearly stand out — and not just under ideal conditions, but also in a normal workshop situation with ambient light, polishing dust, and variable lighting conditions.\u003c\/p\u003e\n\u003cp\u003eDaylight simulation lights from the photography sector with a fixed color temperature (usually 5,500K) are an alternative but have decisive disadvantages: no battery operation, no IP protection class, no all-daylight range, and generally significantly worse robustness for use in the workshop. They are optimized for photo studio use — not for everyday professional detailing, where the light may occasionally fall to the ground, come into contact with spray water, or run for hours in high-intensity operation.\u003c\/p\u003e\n\u003cp\u003eInexpensive LED spotlights with daylight tint (often advertised as \"daylight\") mislead with bright lumen numbers but often only deliver CRI 75–85. This is sufficient for general lighting, but not for defect detection. Anyone who has compared a polished surface under CRI 96 and directly under CRI 80 will immediately understand the difference: what appears flawless under 80 shows its true defects under 96.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e combines the best of both worlds: photo studio color accuracy in a robust, battery-powered tool housing from the FLEX system. Anyone who uses the \u003ca href=\"\/en\/products\/flex-sf150p-swirl-finder\"\u003eFLEX SF 150-P Swirl Finder\u003c\/a\u003e for specific swirl detection uses the DWL 2500 as a supplement for complete quality control — Swirl Finder for spot analysis, DWL 2500 for overall evaluation of the paint result.\u003c\/p\u003e\n\u003ch3\u003eBuying the FLEX DWL 2500 12\/18 — who benefits from the full-spectrum light?\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFLEX DWL 2500 12\/18 Full-Spectrum Light\u003c\/strong\u003e is aimed at professional detailers who want to perform paint inspection at the highest level, at body shop workers who need color matching and paint finish inspection, and at enthusiasts who not only want to polish well but also want to be sure whether their result is truly perfect. It is not an everyday light — it is a precision instrument for anyone for whom the quality of the paint finish is important.\u003c\/p\u003e\n\u003cp\u003eThe device is supplied without a battery and charger. For those already in the FLEX 18V system — with one of the \u003ca href=\"\/en\/products\/flex-xfe21518ec-15mm-akku-exzenterpolierer-freilauf-150mm-18v\"\u003eFLEX 18V polishers\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/flex-bw180ec-akku-geblaese-detailing-set\"\u003eBW 18.0-EC blower\u003c\/a\u003e — the \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e is the logical extension that can already be operated with the existing battery. No additional purchase, no other charging system — just insert the next AP 18V battery pack and go.\u003c\/p\u003e\n\u003cp\u003eFor those not yet in the FLEX 18V system, starting with the \u003ca href=\"\/en\/products\/flex-pset22q-akku-set-18v\"\u003eP-Set 22 Q\u003c\/a\u003e with two batteries and a charger is recommended — this immediately provides the necessary battery supply for alternating operation and makes the DWL 2500 a completely self-sufficient solution for mobile detailing without a power connection.\u003c\/p\u003e\n\u003cp\u003eAs a complement to the \u003ca href=\"\/en\/products\/flex-wls70190-mobiles-leuchten-stativ\"\u003eWLS-70-190 mobile lighting tripod\u003c\/a\u003e, the \u003cstrong\u003eFLEX DWL 2500 Full-Spectrum Light\u003c\/strong\u003e transforms into a full-fledged, tripod-mounted inspection and work light that leaves the detailer's hands free. The tripod set is the recommended configuration for anyone who wants to use the light in a fixed position for longer periods — as a permanent work light source above the vehicle, as an inspection light for the final phase, or as a mobile lighting solution for on-site customer use.\u003c\/p\u003e","brand":"FLEX","offers":[{"title":"DWL 2500 12\/18 \"532325\" (Without battery \/ charger)","offer_id":57377624916303,"sku":"D1-FLEX-532325","price":206.89,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/flex-dwl-2500-12-18-led-vollspektrum-leuchte-12-18v-dwl-2500-12-18-532325-532325.png?v=1775058647"}],"url":"https:\/\/detailing1.ch\/en\/collections\/lackkontrollleuchten.oembed","provider":"Detailing1","version":"1.0","type":"link"}